A Path to Consistent Results

Written by Ryan Gillespie

January 28, 2020

A Path to Consistent Results

By: Ryan Gillespie

Some time ago, I thought I would try some different developers for my black and white film. I knew there would be some differences in the chemistry and developing times, but I figured “As long as my exposure was correct, I should have a nice negative to work with.”
How wrong I was.

This is not a report on what developer is the best. I truly feel that all the developers on the market today are excellent developers to use and will give excellent results. Hell, for many months I only used a homebrew developer concoction called Caffenol made up of Washing soda, Vitamin C, and Instant coffee. Caffenol surprisingly worked very well but when I plunged into Large Format Photography, I thought I should also get more serious about the developer I was using to process my film.

I had heard some great things recently regarding a film from ADOX, their CHS 100 II black and white film and I wanted to give it a try. I went out on location to a scene I walk past multiple times during the week and thought it was interesting enough subject to photograph, as well as a perfect time to do a film test. I loaded up my film holders with ADOX CHS 100 II black and white film and hit the road. Luckily for me I had a nice completely overcast sky giving soft even light over the subject allowing me to keep the same exposure for all sheets of film being exposed, 4 sheets to be exact. My exposure for each sheet of film was f/11 @ 1/30 second at box speed. I then returned home and developed each sheet of film individually in four different developers that I have used over the years. My process for developing is as follows, a water bath/rinse prior to the developer. I keep bathing and rinsing the film until the water runs clear again from the anti-halation layer. Once the water runs clear it’s onto the developer. Each developer was used at 68oF/20oC for the recommended standard times from manufacture. After developer I used a water rinse to stop the development process and then a Fixer bath for 6 minutes.

The developers being used and tested with the CHS 100 film are as follows: Pyrocat HD mixed one part A to one part B to 100 parts water.
Kodak HC-110 mixed 1:7 (Dilution B)
Clayton F-76 mixed 1:9

R09 One Shot mixed 1:100 (one-hour stand development)

I was expecting all the negatives to be fairly close in density range, but I ended up with a very large range of negative densities as seen in the image below.

After a visual inspection, a scan inspection, and a physical print inspection, I decided that I preferred the results from both the Pyrocat HD Developer and the Clayton F-76 Developer. Both negatives did not quite have the density that I prefer to see and the other two negatives were too dense.

When printing for Platinum Palladium, I found that a staining developer works best with prints made from ultraviolet exposures. With this in mind, I settled on using Pyrocat HD as my preferred developer with this ADOX CHS 100 II film.

Hoops

I then decided to take an additional step and try to determine my preferred film speed and Developer combination with the Pyrocat HD, one that would give me a negative density that works for me and my printing methods. I set up a target to photograph under consistent lighting in a studio setting and began making an exposure of the target at different ISO settings on my meter.

After a visual inspection, a scan inspection, and a test print of all the negatives printed together on the same sheet of paper, my personal preference of ISO rating for ADOX CHS 100 II film in combination with Pyrocat HD Developer was an ISO rating of 80. Keep in mind that this is my personal preference and yours may be different.

My recommendation is to do a similar film test with your choice of film, your choice of developer, and whatever meter you use in order to determine your preferred ISO for the film and developer you are using, in doing so you will greatly increase the consistency in printing and or scanning of your images.

If for any reason along your photographic journey you decide to change one or more of the following in the process:

the film, the developer, the temperature of your chemistry, or your light meter. I would suggest doing another film test.

Here’s to more consistent results in your photography!

You May Also Like…

Getting Through A Creative Block

Getting Through A Creative Block

 By Ryan Gillespie Creative Blocks, or barriers to inspiration, can be described as the inability to access one’s...

1 Comment

  1. Jawad

    Hello
    I stumbled upon your article (https://www.thedarkslides.com/a-path-to-consistent-results/) while looking for information on developing Adox CHS 100 in Pyrocat-HD for Pt/Pd. I was wondering if you could answer a few questions:
    1. Are you stilling using this combination?
    2. How have your Pt/Pd print results been with this combo?
    3. I did see your development times mentioned in the article – how much time are you giving with 1+1+100 if thats still your preferred ratio?
    4. Are you doing stand or semi-stand development or just normal agitation?
    Thanks so much for your time.
    Cheers!
    -Jawad

    Reply

Submit a Comment

Your email address will not be published. Required fields are marked *

2 × 1 =